GM57007 - 1/10 GS02F MILITARY BUFFALO TS KIT
Radio control / electric
Shown with custom painted body.
included body is clear.
EQUIPMENT NEEDED (not included)
- STEEL LADDER FRAME
Also, steel parts are black powder coated finish to prevent rust.
- Inner Fenders
- Adjustable wheelbase
- Front weight balance
This will increase the tire tracktion to the front wheel to provide better crawling on a high tilt angle rocks and better driving performance when hill climbing and this will help minimizing the vehicle's rolling over when climbing.
- Front Mounted Motor
The motor is designed to mounted in front of the chassis, so it can increases more tire traction to the front side.
- Multiple Battery Locations
Standard Pack(Max width: 156mm)
Shorty Pack(Max width: 98mm)
- Chassis Mounted Servo system
with panhard bar
It is designed to make it as closed to the zero bump steer so bump steer movement does not appear by front wheel suspension movements, so we ended up with maximizing the steering performance of the vehicle.
In addition, the Panhard-bar is designed to avoid interference with nearby parts, so that the front suspension and shocks can move freely without any loss.
The GS02F transmission is designed to rotate the front wheel faster than the rear wheel.
No overdrive (Option)
30T / 30T (GM30172)
Various surface terrain,
When there is a large percentage of driving on flat land.
Overdrive percentage : 0%
front wheel : 100rpm / rear wheel : 100rpm
Overdrive 1 (Stock)
32T / 28T
Various surface terrain.
Overdrive percentage : 14.29%
front wheel : 114rpm / rear wheel : 100rpm
Overdrive 2 (Option)
33T / 27T (GM30168)
Extreme surface terrain.
Overdrive percentage : 22.22%
front wheel : 122rpm / rear wheel : 100rpm
- Better steering radius
- Better climbing
- 2-speed HI/LO transmission
- torque Twist Reduce transmission
The front and rear universal shafts based on the transmitter each rotates clockwise and counterclockwise, this compensates for the forces acting on the opposite rotational forces due to the action(torque) and reaction(reverse torque) because of that this vehicle can run in a super stable conditions.
- Easy adjust motor mount
Dual slipper clutch
The slipper pads are designed to hold the spur gears evenly to allow more precise setting.
All metal internal gears
Hardened carbon steel universal joints
The front and rear universal shafts of the steel joints provides smooth and stable power train.
The kit also includes the spare parts that allows you to adjust the length of the universal shaft.
- GA44 Axle
Axles are made of high-strength meterials, and it will look and perform optimum off-road perfermance as real 1:1 vehicle when 4-Link suspensions added.
The GA44 axle housing is a durable one-piece type.
The angle of the differential cover is designed to reduce the risk of damage due to frontal impact and is therefore very suitable for off-road driving.
- Kingpin angle
- Hi steer knuckle arm
- adjustable castor
Metal diff locker
Hardened carbon steel CVA kit
- Zero ackerman steering
- SD scaler shock absorber
The oil filled inside the shock minimizes splash when the vehicle is driven, and provides a high-durability aluminum shock body with 3.5mm heavy duty shock shafts are added, these will help you to drive roughly on rough surfaces.
Beginners also can easily assemble this shock and change setups, and the adjustable nut makes it easy to adjust the ride-hight so you can quickly change your car setup even when driving condition changes.
- MT-1902 1.9 INCH M/T OFF-ROAD TIRE
The treads of tire pattern are suitable for off-road driving and are designed with large diameter that enables to run smoothly on any
uneven road surface.
Tire Width: 40mm
Inner Diameter: 48mm (1.9")
- 1.9inch VR01 beadlock wheel
Diameter : 48mm (1.9")
Offset : Zero offset
Hex mount : 12mm
- BUFFALO lexan body
The accessory parts are made of high-strength plastic so they are resistant from the highly impacts, and include decals with realistic details.
- Stealth body mount
Height : 241mm
Length : 544mm
Wheel base : 313mm
Ground clearance : 72mm
Weight (no electronics) : 2.06kg