GM57005 - 1/10 GS02 KOMODO Double cab TS
READY TO RUN
Radio control / electric
Front weight balance
4 wheel drive
(transmitter & receiver)
RS-540 27turn motor
Brushed electronic speed controller
High torque standard servo
EQUIPMENT NEEDED (not included)
- STEEL LADDER FRAME
Also, steel parts are black powder coated finish to prevent rust.
- Adjustable wheelbase
- Front weight balance
This will increase the tire traction to the front wheel to provide better crawling on a high tilt angle rocks and better driving performance when hill climbing and this will help minimizing the vehicle's rolling over when climbing.
- Chassis Mounted Servo system with panhard bar
It is designed to make it as closed to the zero bump steer so bump steer movement does not appear by front wheel suspension movements, so we ended up with maximizing the steering performance of the vehicle.
In addition, the Panhard-bar is designed to avoid interference with nearby parts, so that the front suspension and shocks can move freely without any loss.
- Battery tray
- Dust proof electronics box
- Skid plate
- torque Twist Reduce transmission
The front and rear universal shafts based on the transmitter each rotates clockwise and counterclockwise, this compensates for the forces acting on the opposite rotational forces due to the action(torque) and reaction(reverse torque) because of that this vehicle can run in a super stable conditions.
Dual slipper clutch
The slipper pads are designed to hold the spur gears evenly to allow more precise setting.
All metal internal gears
Hardened carbon steel universal joints
The front and rear universal shafts of the steel joints provides smooth and stable power train.
The kit also includes the spare parts that allows you to adjust the length of the universal shaft.
Not included in stock kit
2-speed HI/LO parts (GM30099)
The first gear is capable of hardcore rock crawling, while the second gear allows you to move quickly to your next crawling and hill climb places.
- Easy adjust motor mount
- GA44 Axle
Axles are made of high-strength meterials, and it will look and perform optimum off-road perfermance as real 1:1 vehicle when 4-Link suspensions added.
The GA44 axle housing is a durable one-piece type.
The angle of the differential cover is designed to reduce the risk of damage due to frontal impact and is therefore very suitable for off-road driving.
- Kingpin angle
- Hi steer knuckle arm
- adjustable castor
Metal diff locker
Hardened carbon steel CVA kit
- Zero ackerman steering
- SD scaler shock absorber
The oil filled inside the shock minimizes bouncing when the vehicle is driven, and provides a high-durability aluminum shock body with 3.5mm heavy duty shock shafts are added, these will help you to drive smoothly on rough surfaces.
Beginners also can easily assemble this shock and change setups, and the adjustable nut makes it easy to adjust the ride-hight so you can quickly change your car setup even when driving condition changes.
- MT-1903 1.9 INCH M/T OFF-ROAD TIRE
The treads of tire pattern are suitable for off-road driving and are designed with large diameter that enables to run smoothly on any
uneven road surface.
Tire Width: 40mm (1.6")
Inner Diameter: 48mm (1.9")
- 1.9inch NR03 wheel
Diameter : 48mm (1.9 inch)
Offset : 0.5mm positive offset
Hex mount : 12mm
- Komodo double cab lexan body
Includes a grille, light bucket, side mirror, wiper grille and bumper and roll bars for off-road adventure concepts that add body detail, allowing you to tune to the look of a real off-road truck.
Accessory parts are made of high-strength plastic and are extremely strong in impact and includes decals with realistic details.
Not included in stock kit
KOMODO snorkel (GM60195)
- Stealth body mount
Height : 245mm
Height(with out roof rack) : 213mm
Length : 525mm
Wheel base : 313mm
Ground clearance : 73mm
Weight (no electronics) : 1.96kg